羞羞网站-天堂VA蜜桃一区二区三区-无码久久精品国产亚洲AV影片-国产精品久久久久久吹潮

產品中心您當前的位置:首頁 > 產品中心 > ADCMT愛德萬ADVANTEST > 直流電源/恒流電流源 > 日本愛德萬直流電源ADCMT6242

基礎信息Product information

產品名稱:日本愛德萬直流電源ADCMT6242

產品型號:

更新時間:2024-08-17

產品簡介:

日本愛德萬直流電源ADCMT6242, 中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友(上海)測量儀器JETYOO INSTRUMENTS,專業為中國區用戶提供Support、銷售Sale、服務Service

產品特性Product characteristics

    中國電子行業儀器優質供應商——堅融實業JETYOO INDUSTRIAL & 堅友(上海)測量儀器JETYOO INSTRUMENTS,專業為中國區用戶提供儀器設備、技術培訓與售后維修服務,Support、銷售Sale、服務Service,3S公司,為上海華東地區一家以技術為導向的儀器綜合服務商,是您值得信賴的電子行業儀器專家。


直流電壓電流源日本愛德萬直流電源ADCMT6242產品概述
6242,發生41/2數字,在測量51/2位數字,是測量電源基本精度為±0.02%的高準確度的表現。
傳統的線性,Fikusudo和隨機掃描,新除了添加到斜率線性掃描(掃到中途步驟值切換),則zui小脈沖寬度為50μs的脈沖測量功能,zui小分辨率,1μV/100pA減小電壓由電流測量,在研究和半導體等電子元器件的發展的評估和生產線的特性試驗,可以使用范圍很廣。
到電池和電源IC的評價,能夠吸收雙極性輸出,高/低限單個設置功能,是有效的暫停功能,在這里你可以選擇*的輸出OFF狀態。
外部接口,USB除了GPIB是標準的。


日本愛德萬直流電源ADCMT6242產品特點
各種各樣的生成和測量功能
電壓:0?±6V電流:0?±5A
高分辨率的產生和測量分辨率
發生分辨率:10μV/1nA的測量分辨率:1μV/100pA減
基本精度±一代,測量0.02%
zui小脈沖寬度為50μs,分辨率為1μs的脈沖測量
配備了新的功能,坡線性掃描
可吸收雙極性輸出
配備GPIB/ USB作為外部接口

DC Voltage Current Source/Monitor Key Facts
6242 is DC voltage and current source/monitor with high-performance features including source resolution of 4½ digits, measuring resolution of 5½ digits, and a basic accuracy of 0.02%. It supplies/measures 0 to ±6 V / 0 to ±5 A and enables extensive pulse generation and measurement functions including sweep and pulsed sweep. 6242 can generate pulse widths down to 50µs and can measure with a resolution down to 1µV/100pA. So this product can be used for a wide range of applications, e.g. as a power source for evaluations in research and development of semiconductors and other electronic components, or as a power source for a production line characteristic test system. 6242 is very well suited for the evaluation of solar cell characteristics. At the same time, the individual HI/LO limiter setting function demonstrates its power in evaluation of batteries and power source ICs. Its suspend function enables the selection of the optimal OFF state depending on the specific requirement of each application. 6242 is equipped with GPIB and USB interface in standard.


,Features & Benefits
0 to ±6 V / 0 to ±5 A
4-quadrant supply with positive and negative output voltages, even useable as DC sink
applicable as voltage source or as real current source
source and measurement with a basic accuracy of ±0.02%
high resolution in source (10 µV/1 nA) and measurement (1 µV/100 pA)
fast sample and waveform buffer (8000 data)
pulse generation and measurement with minimum pulse width of 50 µs
minimum pulse period: 500 µs
lowest ripple & noise
DC and pulse sweep with fixed/linear/random and two-slope linear functions
fast generation mode switching
individual settings of HI and LO limits
suspend function with different output OFF states (STBY/ HiZ / LoZ)
settable suspend voltage to prevent battery discharge
R measurement in CV or in CC mode
precise timing at pulse generation and definition of the measurement window
comfortable trigger and synchronisation capabilities of multiple units and with other instruments
programmable comparator limits
scaling calculation of measurement results
automatic “Null Calculation” for cancelling of offset values
parallel and serial operation of several units possible
settling time 30 µs (in FAST response mode)
additional S&H mode for short pulse measurements
GPIB and USB interfaces

Specifications 6242A

Voltage Source/Measurement Range
RangeSource RangeSetting ResolutionMeasurement RangeMeasurement Resolution
300 mV0 to ±320.00 mV10 µV0 to ±320.999 mV1 µV
3 V0 to ±3.2000 V100 µV0 to±3.20999 V10 µV
6 V0 to ±6.000 V1 mV0 to±6.0999 V100 µV
Line regulation:±0.003% of range or less
Load regulation:±0.003% of range or less (at 4-wire connection with maximum load)
Current Source/Measurement Range
RangeSource RangeSetting ResolutionMeasurement RangeMeasurement Resolution
30 µA0 to ±32.000 µA1 nA0 to ±32.0999 µA100 pA
300 µA0 to ±320.00 µA10 nA0 to ±320.999 µA1 nA
3 mA0 to ±3.2000 mA100 nA0 to ±3.20999 mA10 nA
30 mA0 to ±32.000 mA1 µA0 to ±32.0999 mA100 nA
300 mA0 to ±320.00 mA10 µA0 to ±320.999 mA1 µA
3 A0 to ±3.000 A100 µA0 to ±3.00999 A10 µA
5 A0 to ±5.000 A200 µA0 to ±5.00999 A10 µA
Resistance Measurement Range
 Measurement RangeMeasurement Resolution
Determined by the operation of Voltage range/Current range0 Ω to 304 MΩMinimum 0.2 µΩ
Output Noise
For voltage source within the range from no load to maximum load [Vp-p]
Voltage Source:
RangeLoad resistanceLow Frequency NoiseHigh Frequency Noise
  DC to 100HzDC to 10kHzDC to 20MHz
300 mV-50µV200µV3mV
3 V-50µV300µV3mV
30V/6V-500µV2mV4mV
General Source/Measurement Functions
DC Source/MeasurementSource/measurement of DC voltage/current
Pulse Source/MeasurementSource/measurement of pulse voltage/current (However, measurement auto range in pulse source is impossible.)
DC Sweep Source/MeasurementSource/measurement with linear, two-slope linear, random and fixed level.
Pulse Sweep Source/MeasurementSource/measurement with linear, two-slope linear, random and fixed level.
 (However, measurement auto range in pulse source is impossible.)
Integration Time100µs, 500µs, 1ms, 5ms, 10ms, 1PLC, 100ms,
 200ms, or S/H
 S/H: Measuring in Sample & Hold Mode (Integration time: 100µs), (Enabled only in pulse source and pulse sweep source modes.)
 PLC: Power Line Cycle:
 50Hz:20ms 60Hz:16.66ms
Sweep ModeReverse ON/OFF (forward to backward / one way)
Sweep Repeat Time1 to 1000 times, or infinite
Number of Sweep Maximum Step8000 steps
Random Sweep Maximum Memory8000 data
Measurement Data Memory8000 data
Measurement Auto RangeAvailable only in VSIM or ISVM
Measurement Function Link ModeLinks the source function to the measurement function (VSIM or ISVM) ON/OFF available
LimiterPossible to set separay at HI or LO sides (However, in case of current limiter, the same polarity can not be set.)
Calculation FunctionsNULL calculation
 Comparator calculation (HI/GO/LO)
 Scaling calculation
 MAX/MIN/AVE/TOTAL calculation
Trigger StyleAuto-Trigger, external Trigger
Output TerminalFront; Safety sockets,
 HI OUTPUT, HI SENSE, LO OUTPUT, LO SENSE
Maximum Input Voltage between TerminalsR6242A: 6V peak MAX (between HI and LO)
 2V peak MAX /(between OUTPUT and SENSE)
 250V MAX (between LO and chassis)
Maximum Remote Sensing Voltage± 1V MAX
 between HI OUTPUT and HI SENSE
 between LO OUTPUT and LO SENSE
 (The voltage between HI SENSE and LO SENSE must be within the maximum output voltage range)
GPIB InterfaceCompliant with IEEE-488.2-1987
 Interface functions: SH1, AH1,T5, L4, SR1, RL1, PP0, DC1, DT1, C0, E2
 Connector: Amphenol 24 pin
USB InterfaceUSB 2.0 Full-Speed; Connector Typ B
External Control SignalTRIGGER IN,
 INTERLOCK, OPERATE IN/OUT, COMPLETE OUT, SYNC OUT
General Specification
Power Supply:AC power 100V, 120V, 220V, 240V (switchable by user)
Line Frequency:50Hz/60Hz
Power Consumption:6242: 180VA or less
Dimensions:Approx. 212(W) x 88(H) x 400(D) mm
Mass:6242: 6.5kg or less
Safety:IEC 61010-1
EMI:EN1326 class A


直流電圧?電流源/モニタ6242製品概要
6242は、発生41/2桁、測定51/2桁で、基本確度が±0.02%の高確度の性能を持った計測電源です。
従來のリニア、フィクスド、ランダム掃引と、新た にツー?スロープ?リニア掃引(ステップ値を途中切り換える掃引)の追加に加え、zui小パルス幅50μsのパルス測定機能、zui小分解能が1μV/100pAの微少電圧?電流測定により、半導體やその他電子 部品の研究?開発での評価や生産ラインでの特性試験に、幅広くお使いいただけます。
バッテリや電源用ICの評価に、シンク可能なバイポーラ出力、HI/LOリミッタ個別設定機能、およびzui適な出力OFF狀態を選択できるサスペンド機 能が有効です。
外部インタフェースは、GPIBに加えUSBが標準裝備されています。


直流電圧?電流源/モニタ6242特長
広範囲な発生?測定機能
電圧:0~±6V 電流:0~±5A
高分解能の発生?測定分解能
発生分解能:10μV/1nA 測定分解能:1μV/100pA
基本確度±0.02%の発生、測定
zui小パルス幅50μs、分解能1μsのパルス測定
ツー?スロープ?リニア?スイープの新機能を搭載
シンク可能なバイポーラ出力
外部インタフェースとしてGPIB/USBを標準裝備


電圧電流発生器
   型名          製品名稱                 説明
日本ADCMT6146電圧電流発生器        4 1/2桁広いダイナミック?レンジ機器の校正、二次電池の擬似電源に
日本ADCMT6156電圧電流発生器        5 1/2桁広いダイナミック?レンジ熱電対起電力出力も可能
日本ADCMT6166電圧電流発生器        6 1/2桁 高安定?高確度のバイポーラ出力の標準電源
日本ADCMT6240A電圧電流発生器          51/2桁の測定と4Aのパルス発生の直流電圧?電流源/モニタ
日本ADCMT6240B電圧電流発生器        51/2桁の測定で、半導體試験や接觸抵抗試験を高精度に計測可能
日本ADCMT6241A直流電圧電流源モニタ  基本確度±0.02%、zui小50μsパルス発生?測定ができる高性能な計測電源
日本ADCMT6242直流電圧電流源モニタ        基本確度±0.02%、zui小50μsパルス発生?測定ができる高性能な計測電源
日本ADCMT6243電圧電流発生器     5 1/2桁(±320000)測定とパルス幅1msのパルス測定機能
日本ADCMT6244電圧電流発生器    フレキシブルな発生と測定で電子回路(部品)評価にzui適な直流電圧?電流源/モニタ
日本ADCMT6245,日本ADCMT6246電圧電流発生器      2チャンネルを同一タイミングで測定する同期測定機能搭載
日本ADCMT6247C,日本ADCMT6247G直流電圧電流源モニタ     LEDモジュールや高電圧半導體評価にzui適
日本ADCMT6501マルチチャンネル直流電圧電流源モニタ        電子部品の生産ラインや品質管理にzui適な4チャンネルのソース/モニタ


日本ADCMT愛德萬ADVANTEST直流電源系列產品
   型號       產品名稱        說明
日本愛德萬直流電源ADCMT6146電壓電流發生器              41/2位寬校準動態范圍的裝置,所述二次電池的所述偽電力
日本愛德萬直流電源ADCMT6156電壓電流發生器            51/2位動態范圍寬熱電TaiOkoshi功率輸出也可能
日本愛德萬直流電源ADCMT6166電壓標準電源/電流發生器      61/2位的穩定性和高精度雙極性輸出
日本愛德萬直流電源ADCMT6240A電壓發電機                2分之51位測量和4A的脈沖發生器的直流電壓和電流源/監視器的當前
日本愛德萬直流電源ADCMT6240B電壓電流發生器          51/2數字的測量,可以測量半導體測試和接觸電阻測試以高精確度
日本愛德萬直流電源ADCMT6241A直流電壓和電流源監控      基本精度±0.02%,高性能的測量能力,能夠zui小為50μs脈沖生成和測量
直流電壓和電流源監控      基本精度±0.02%,高性能的測量能力,能夠zui小為50μs脈沖生成和測量
日本愛德萬直流電源ADCMT6243電壓電流發生器            51/2位(±320000)脈沖測量的測量功能,脈沖寬度為1ms
日本愛德萬直流電源ADCMT6244電壓電流發生器         靈活生成和電子電路(份)中在*的直流電壓和電流源/監視器的測量和評價
日本愛德萬直流電源ADCMT6246/6245電壓電流發生器    2的同步來測量信道在功能相同的定時測量
日本愛德萬直流電源ADCMT6247C/6247G是理想的直流電壓和電流源          監視器LED模塊和高壓半導體評價
日本愛德萬直流電源ADCMT6501多路直流電壓和電流源/監控電子元件生產線和的四個通道,以質量管理和源/監視器

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7

上一篇:6241A日本ADCMT直流電源

下一篇:ADCMT 6243日本愛德萬ADCMT直流電壓電流源/監測器